Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

Neck Pocket Routing: Myka Jig and Templates
http://www-.luthiersforum.com/forum/viewtopic.php?f=10117&t=40211		 Page 1 of 1
Author:  dpm99 [ Mon Apr 29, 2013 4:21 pm ]
Post subject:  Re: Neck Pocket Routing: Myka Jig and Templates
Great video, Chris. I'll confess I skipped some, but only because I'm familiar with the jig. Here's mine, built from scrap plywood. The neck angle is adjustable through adding and taking away spacers and washers.

Image

And disassembled...

Image
Author:  Kent Wilkinson [ Sun Nov 08, 2015 9:14 am ]
Post subject:  Re: Neck Pocket Routing: Myka Jig and Templates
Where can I see the video?
Author:  dzsmith [ Sun Nov 08, 2015 4:18 pm ]
Post subject:  Re: Neck Pocket Routing: Myka Jig and Templates
Here you go Kent.
https://m.youtube.com/watch?v=IpPEaaJ3QtI
(Mux Guitars)
It looks like a nifty jig, but I do not make a super-tight neck joints.
You need space for glue and humidity changes.
Dan
Author:  Kent Wilkinson [ Sun Nov 08, 2015 5:47 pm ]
Post subject:  Re: Neck Pocket Routing: Myka Jig and Templates
dzsmith wrote:
Here you go Kent.
https://m.youtube.com/watch?v=IpPEaaJ3QtI
(Mux Guitars)
It looks like a nifty jig, but I do not make a super-tight neck joints.
You need space for glue and humidity changes.
Dan



Thank you.
Author:  dzsmith [ Sun Nov 08, 2015 5:49 pm ]
Post subject:  Re: Neck Pocket Routing: Myka Jig and Templates
Kent Wilkinson wrote:
dzsmith wrote:
Here you go Kent.
https://m.youtube.com/watch?v=IpPEaaJ3QtI
(Mux Guitars)
It looks like a nifty jig, but I do not make a super-tight neck joints.
You need space for glue and humidity changes.
Dan



Thank you.

You are quite welcome!
Now, back to work on your Tele!
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/